产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

防撞墙模具的设计

网址:www.jiaobanji.net.cn  2022-10-27  作者:admin    阅读:

防撞墙模具的设计源自于对公路行人、行车的保护,防撞墙模具采用的结构原理为上小下大,这样的构造起到了很好的防撞效果,而且高度设置基本上在80厘米以上,1.2米以下。防撞墙模具的设计有效的保证了行车、行人的安全,这样在不同的公路上,防撞墙都能发挥它自己的作用。
The design of the anti-collision wall mold comes from the protection of highway pedestrians and driving. The structural principle of the anti-collision wall mold is small at the top and large at the bottom. This structure has a good anti-collision effect, and the height is basically more than 80cm and less than 1.2m. The design of anti-collision wall mold effectively ensures the safety of driving and pedestrians, so that the anti-collision wall can play its own role on different roads.
主要设置在道路中间和两侧,起到隔离行人和机动车的作用,有些大坑或者道路两侧需要隔离开的也多使用水泥道路防撞墙模具,水泥道路防撞墙模具的定网站建设  伺服液位仪  防撞墙模具 唐山护栏  钢纤维 天津除甲醛  保定铝型材尺寸多样,有大有小,水泥道路防撞墙模具多采用钣金模具生产,形状上大下小成人字行,是城市道路和高速道路两侧常用到的水泥制品。
It is mainly set in the middle and both sides of the road to isolate pedestrians and motor vehicles. Cement road anti-collision wall molds are also used for some large pits or road sides that need to be separated. Cement road anti-collision wall molds have various sizes, ranging from large to small. Cement road anti-collision wall molds are mostly produced by sheet metal molds, with large and small adult lines, It is a cement product commonly used on both sides of urban roads and expressway.

返回新闻

转让电话
13313028229